System Components & Accessories

The PROWatt 2000 Watt pure sine wave inverter is a compact, powerful inverter that is easy to install and use in commercial truck, RV and marine applications. Provides reliable, clean power for variety of electrical loads, including sensitive electronics. 

The Sunforce 2500 Watt Pure Sine inverter converts 12V DC to 110V AC of pure sine wave power. Operates pumps, mini motors and appliances that wont run on modified sine wave inverters. Power Supply: 12V DC, Continuous Watts: 2,500, Surge Watts: 5,000, Surge Amps: 10A per channel (4 channels), AC Outlets (qty.): (4) 110V, DC Outlets (qty.): 1. Delivers 2500 continuous Watts, Delivers 5000 surge Watts. Four 110V outlets, LCD digital display, Wireless remote control, Soft start system, Low battery shutdown, Thermal overload protection, Short circuit protection, 90% efficient. 

This Xantrex Freedom 3000 Watt full power inverter provides true sine wave output. Its an ideal choice for operating power tools, microwaves, entertainment systems, plasma or LCD TVs, computers, refrigerators and more. Built-in transfer switch automatically transfers between inverter power and incoming AC power. Temperature compensated charging for all climate conditions; can operate between -4°–140°F. Also includes coated circuit boards that provide protection in humid environments. Use for commercial trucking, RV, marine and construction applications. Requires system control panel (Item# 456020) to operate, sold separately. Dual input/output AC interface. UL listed. 2-year limited warranty. Continuous Watts: 3,000, Surge Watts: 6,000.

This Xantrex System Control Panel is designed to work with the Xantrex Freedom SW 3000 Watt inverter (Item# 456072). It controls devices connected to network, reducing the complexity of separate control panels for each device in multiple network devices. The system control panel provides a graphical backlit LCD screen that displays system configuration and diagnostic information in a central location. It features an innovative, intuitive onscreen menu system that makes it easy to for a user to configure and operate. Xanbus enabled design allows easy connection with network cables. Meets UL 458 Marine and RV standards. Accessory Type: Control panel, Power Supply: Inverter, Compatible With: MS and RS Series Inverter/Chargers, Display Type: Graphical 128×64 pixel LCD display, UL Listed: Meets UL 458 Marine and RV standards Large, tactile keys.

High-performance German-engineered charge controller with pulse width modulation for quicker charging and more efficient solar power systems. Designed for small solar systems where no load disconnect is required, such as yachts and RVs where the load/inverter is connected directly to the 12V battery. The controller handles up to 127.5 Watts from a solar array, and is designed for 12 volt systems only. Amps: 8.5, Watts: 127.5 Features temperature compensation and reverse polarity protection. 

This NPower digital charge controller is used to link solar panels together. It stabilizes incoming voltage to prevent 12V batteries from overcharge and discharge. Digital controller reduces overall system maintenance and prolongs battery life. Amps: 30, Watts: 450 For use with 12V solar panels and batteries only LCD monitor displays charging current and voltage Easy-to-read LED bar graph indicates battery charge level Handles up to 30 Amps of solar array current or up to 450 Watts solar power. Maintenance free.

High-performance German-engineered charge controller with pulse width modulation for quicker charging and more efficient solar power systems and protects batteries from being overcharged by solar array. Adjusts itself automatically to 12V or 24V system voltages. Can handle up to 750 Watts of solar array, and is designed for a 12 volt system or a 24 volt system and will automatically sense the voltage of the system. Amps: 50 Designed for 12V and 24V systems and automatically senses the voltage of the system Features temperature compensation and reverse polarity protection Deep discharge protection function provides sound alarm and integrated low voltage disconnect ensures batteries never go dead PWM charging includes boost, float and absorption charging Multifunctional LCD display shows battery state of charge in a clear bar graph Includes complete electronic protection and negative grounding Handles up to 750 Watts of solar array, this controller will adjust itself automatically to 12V or 24V system voltages.

This BPS Photovoltaic solar array cable is suitable for series wires (panel to panel) or parallel wiring from photovoltaic array to combiner box. Cables have snap-together hard plastic connectors at each end and have one male and one female end. U.S.A. Accessory Type: Solar array cable, Compatible With: Photovoltaic array, Connector Type: MC4 plastic connector at each end, Length (ft.): 50, Material Type: AWG #10 sunlight resistant cable construction, Dimensions L x W x H (in.): 600 x 5/32 x 5/32 Can be used to extend module cable or cut anywhere along the wire for needed length.

This MidNite Solar photovoltaic DC circuit breaker is a dinrail mount breaker that is specifically designed for photovoltaic combiners. Provides branch circuit protection for DC loads and is suitable for charge controller input and output disconnects. Accessory Type: DC circuit breaker, Amps: 63, Compatible With: Photovoltaic combiners, Class Rating: Meets NEC requirements, Mount Type: Dinrail mount, Dimensions L x W x H (in.): 4 3/16 x 1/2 x 3 5/16 Meets NEC requirements for over current protection on both sides of charge controllers to protect wiring from potential fires in the event of controller failure Can also work as on-off switch for DC load circuits.

This BPS Photovoltaic solar array cable is suitable for series wires (panel to panel) or parallel wiring from photovoltaic array to combiner box. Cables have snap-together hard plastic connectors at each end and have one male and one female end. U.S.A. Accessory Type: Solar array cable, Compatible With: Photovoltaic array, Connector Type: MC4 plastic connectors at each end, Length (ft.): 100, Material Type: AWG #10 sunlight resistant cable construction, Dimensions L x W x H (in.): 1200 x 5/32 x 5/32 Can be used to extend module cable or cut anywhere along the wire for needed length.

This MidNite Solar photovoltaic DC circuit breaker is a dinrail mount breaker that is specifically designed for photovoltaic combiners. Provides branch circuit protection for DC loads and is suitable for charge controller input and output disconnects. Accessory Type: DC circuit breaker, Amps: 30, Compatible With: Photovoltaic combiners, Class Rating: Meets NEC requirements, Mount Type: Dinrail mount, Dimensions L x W x H (in.): 4 1/2 x 1/2 x 3 5/16 Meets NEC requirements for over current protection on both sides of charge controllers to protect wiring from potential fires in the event of controller failure Can also work as on-off switch for DC load circuits.

This Midnite Solar DC circuit breaker provides over current protection and is designed for use with inverters. Can hold up to 5 additional dinrail mount circuit breakers for charge controller input and output and breakers for DC load circuits, including lights, refrigerators, water pumps and more. U.S.A. Accessory Type: DC circuit breaker box, Amps: 250, Compatible With: Panel mount breakers, Capacity: 2,000 – 4,000 Watts, Mount Type: Mounting holes for 500 Amp shunt, Material Type: Aluminum powder-coat construction, Dimensions L x W x H (in.): 17 x 9 x 3 Includes battery minus 5/16in. stud and ground bus bar Mounting holes for 500 Amp shunt and long insulated bus bar Cover plates accommodate din rail and 3/4in. wide panel mount breakers.

This Midnite Solar DC circuit breaker provides over current protection and is designed for use with inverters. Can hold up to 5 additional dinrail mount circuit breakers for charge controller input and output and breakers for DC load circuits, including lights, refrigerators, water pumps and more. U.S.A. Accessory Type: DC circuit breaker box, Amps: 175, Compatible With: Panel mount breakers, Capacity: 1,200 to 2,000 Watt, Mount Type: Mounting holes for 500 Amp shunt and long insulated bus bar, Material Type: Aluminum powder-coat construction, Dimensions L x W x H (in.): 17 x 9 x 3 Includes battery minus 5/16in. stud and ground bus bar Mounting holes for 500 Amp shunt and long insulated bus bar Cover plates accommodate din rail and 3/4in. wide panel mount breakers.

This Midnite Solar Photovoltaic Combiner accepts dinrail mount breakers, ensuring compliance with NEC requirements for combiners when more than 2 strings of photovoltaic modules are installed. DC breakers protect wiring from potential fire in the event of module failure. Handles six 150V DC breakers. U.S.A. Accessory Type: Photovoltaic combiner, Compatible With: 150V breakers, Class Rating: ETL listed, Capacity: 6 150V DC breakers, Enclosure Type: Rainproof NEMA 3R aluminum enclosure, Material Type: Injection molded insulating deadfront under aluminum flip-up exterior cover, Dimensions L x W x H (in.): 12 3/4 x 8 x 3 3/4 Includes positive bus bar, negative bus bar Din rail for breaker mounting Knockouts for electrical connections and lightning arrestor mounting ETL listed for use in the U.S. and Canada; check individual photovoltaic specs for required series fuse (circuit breaker) rating.

This Midnite Solar Photovoltaic Combiner accepts dinrail mount breakers, ensuring compliance with NEC requirements for combiners when more than 2 strings of photovoltaic modules are installed. DC breakers protect wiring from potential fire in the event of module failure. Handles three 150V DC breakers. U.S.A. Accessory Type: Photovoltaic combiner, Compatible With: 150V breakers, Class Rating: ETL listed, Capacity: 3 – 150V breakers, Mount Type: Wall, Enclosure Type: Injection molded insulating deadfront under aluminum flip-up exterior cover, Material Type: Rainproof NEMA 3R aluminum enclosure, Dimensions L x W x H (in.): 10 1/2 x 5 x 3 1/2 Includes positive bus bar, negative bus bar Din rail for breaker mounting Knockouts for electrical connections and lightning arrestor mounting ETL listed for use in the U.S. and Canada; check individual photovoltaic specs for required series fuse (circuit breaker) rating.